Cisco Secure Services Client Instructions
UI Wireless uses the Protected Extensible Authentication Protocol (PEAP) protocol to give our users a greater level of security. The Cisco Secure Services Client (previously known as the Meetinghouse AEGIS) software will allow most wireless cards to access our network. Choose the Cisco Secure Services installation or configuration instructions that apply to your situation.
Note: The Cisco Secure Services client is only available for the Windows XP operating system at this time. Windows Vista users can use the built-in Vista Windows Wireless client to connect to the UI Wireless network.
-
Cisco Secure Services Installation - Use these instructions to install the pre-configured Cisco Secure Services client software and connect to the UI Wireless network.
- Cisco Secure Services Client Non-UI Network Configuration - Use these instructions to configure the Cisco Secure Services Client to connect to a non-UI wireless network (open or secured).
- Cisco Secure Services Client Configuration for UI-Wireless-WEP - Use these instructions to configure the Cisco Secure Services Client to connect to the UI-Wireless-WEP network if your computer won't connect using the WPA2 profile.
Return to Wireless Support Center
Last Updated: 04/24/2008